Villager
VLN 0805 (GB)
10
Selecting the drilling programme:
Note: The following pictures serve as examples, and may vary depending on the
power tool model.
Unlock the drilling/impact drilling/chiseling switch and turn it to this symbol “
”
until it jumps into place.
Selecting the impact drilling programme:
Use the switch lock to unlock the drilling/impact drilling/chiseling switch (2) and turn it
to this symbol “
” until it jumps into place.
ASSEMBLY & OPERATION
Always make sure the power tool is isolated from the power supply before fitting any
attachments
Handle. See (Fig 1)
Always make sure the fixed handle is secured before any job takes place as a loose handle
invites accidents.
Fig 1
Switching the chisel on/off
The chisel has an On/Off switch (Fig 2) built in to the handle. Hold the chisel with both hands
and simply squeeze the trigger and the motor will start. To switch off release the trigger.
