villaware.com
villaware.com
villaware.com
villaware.com
Before Using:
When unpacking the product and removing
packing material, and any promotional labels
or stickers from your food processor. Be
sure all parts (listed under Features) of your
new appliance have been included before
discarding any packaging materials. you may
want to keep the box and packing materials
for use at a later date.
handle the chopping blade, slice/shred discs
and french fry cutter carefully: they are very
sharp. Wash all parts except the Base in hot,
soapy water. Rinse them dry. These parts can
also be placed in the dishwasher. Be sure
to read the Care & Cleaning Section of this
manual to learn the correct methods for
taking the unit apart and cleaning.
Control Knob
1
Pulse
Pulse
– The control knob must be
turned to the left and held for unit to
operate. When released, unit will stop.
Use PULSE for short processing tasks,
such as chopping nuts, raw meats, or
vegetables. This lets you check processed
results and control the consistency.
2
On
On
– When the control knob is turned
to the right to the ON position, unit will
run continuously until the control knob
is turned to OFF position.
3
Off
Off
– Processor should always be left in
OFF position when not in use.
nOTe:
Do not attempt to chop ice in this
food processor; it will damage the bowl and
dull the Chopping Blade. This unit will not
whip cream, beat egg whites, grind coffee
beans, spices or other items with high oil
content, or slice or shred hard-cooked eggs,
marshmallows, or soft cheeses.
Important:
For your protection, this unit has
an interlock system.
The processor will not
operate unless the bowl is properly locked
onto the base and cover is properly locked
onto the bowl.
Do not attempt to operate
the unit without the bowl lid, bowl and food
chute lid correctly in place. Be sure base is on
a flat, dry and clean surface before you begin
processing.
nOTe:
Before you begin, PLEASE BE SURE
ThAT ThE ELECTRIC CORD IS UNPLUGGED.
PULSE
OFF
ON
how To:
Assemble The Bowl
Align the base and bowl (
figure 1
). Align the
bowl ARROW with the UNLOCk mark
on the base. Turn the bowl counter-clockwise
until it clicks onto the base. The bowl handle
should now align with the Control Button the
base.
(Figure 1)
nOTe:
There is only one position for the
bowl to lock onto the base. The unit will not
operate if the bowl does not lock onto the
base.
lock the Cover
Place the cover onto the bowl. Align the
ARROW mark on the cover and the
ARROW mark on the bowl. Twist the cover
counter-clockwise towards the LOCk mark
until it clicks onto the bowl. The LOCk
mark on the cover should now align with the
LOCk mark on the bowl.
(Figure 2)
nOTe:
When the cover is locked into
position, the safety mechanism on the cover
and bowl will align. The unit will not operate
if the cover is not locked onto the bowl.
nOTe:
BOWL mUST BE LOCkED INTO
BASE BEFORE COVER CAN BE LOCkED INTO
POSITION.
4
5
PULSE
OFF
ON
Figure 1
Figure 2
lock the food Chute lid
1
The Food Chute lid hinges onto the back
of Food Chute.
2
Push down the Large Food Pusher into
the Food Chute.
3
Push down on the Large Food Pusher to
latch the Food Chute lid onto the Lid.
nOTe:
Unit will not operate if the Food
Chute lid does not latch onto the Lid.
