62
Pic 55
GAS current values screen [Communication>Connected devices>Gas meters>Current
values]
7.10.3
M-Bus connected meters [Communication>Connected devices>MBus devices]
Data Logger support up to 2 Mbus interfaces, to each interface can be connected up to 200 Mbus
meters (by using RS232/RS485 to Mbus converter you can extand range of supported devices),
so total number meters per data logger is 400 (see
Setting up Mbus interfaces:
1.
Enable or Disabel interface by using check box.
2.
Assign COM client by entering number of COM port (UART port must be configured
and assigned to COM client, on how to do this, see chapter 7.7);
3.
See and correct if you need Read period value in minutes. Field value can be form 1 to
720 minutes.
4.
Send data to
d
ata logger, to take action.
Summary of Contents for MX-7
