69
Pic 63
Restart if GPRS connection failed or packets was not received
7.13
Limits verification
This option is used for customizing of alerts. To setup limits verification, you need:
1.
Choose “Type of limit” (and this must to be done first);
2.
Enter what register you want to control (see file “List of registers” to find correct register
and format) or chose from Main fields list (on how to prepare the list, read down);
3.
Enter data type, corresponding to data type of used register;
4.
Chose limits;
5.
Delay time, if you want to filter accidental ar short time events;
6.
And a code of event (value must to be from 0 to 99 and will be used for alerts SMS
sending )
If you need to get data not from the first register – you need to count address of register:
•
One register takes 2 bytes;
•
Char
type argument takes – 1 register;
•
Int16
type argument takes – 1 register;
•
Int32
type argument takes – 2 registers;
•
Float
type argument takes – 2 registers
Summary of Contents for MX-7
