background image

 

21/24 

NT00000604-JBRB-ECOWATT-AN-191202

7. 

MAINTENANCE

7.1  Prior precautions

Shut off the power supply before carrying out any work and make sure that it cannot be accidentally turned 

back on (+ padlock switch-disconnector in OFF position during the entire process).

7.2  Maintenance frequency

Carry out a regular inspection according to the following recommendations

Body

When commissioned

At least every 6 months

Turbine

Check the direction of rotation, check the absence 

of rubbing between mobile parts and stationary 

parts

Clean, check the absence of rubbing between 

mobile parts and stationary parts

Controller

Check the connections, particularly the 
connection to the earth electrode

Tighten the terminals if necessary, check the 
ampere rating

On-off switch

Check the connections, particularly the 
connection to the earth electrode

Tighten the terminals if necessary

Duct networks

Check seals

Clean if necessary

Pressure inlet

Check aeraulic connections

Check operation

Auxiliary fan 

Check operation using test button

Check operation using test button

7.3  Access to electric fan

JBRB ECOWATT

®

 04 to 38

JBRB ECOWATT

®

 48 to 92

To access all the unit compartments, unfasten the 4 latches, then remove the unit cover using the handles. 
The inlet, discharge and motor compartments are entirely accessible for cleaning.

Summary of Contents for JBRB ECOWATT 04

























Reviews: