16
- Press button
to confirm and pass on to setting the temperature
T3
; the display will show the reference value
blinking�
- Use button
to set the desired temperature
T3
�
- Press button
to confirm; the display will show the
dIFF
icon and the relevant temperature differential blinking
at 00�2°C�
- Use button
to set the desired temperature differential�
- Press button
to confirm and pass on to setting the temperature scale; the display will show the current
temperature with the unit of measurement blinking (
°C
Celsius or
°F
Fahrenheit)�
- Use button
to set the desired unit of measurement�
- Press button
to confirm and exit�
• Creating the automatic program
With this procedure you can create the time program that, for each day of the week, regulates the ambient temperature
(heating and air-conditioning) according to the set values T1, T2 and T3�
- Set the
“Automatic”
operating mode (see page 10)�
- Press button
or button
to enter the program creation menu; the display will show the
icon
PrOG.
- Press to confirm and access program setting; the display will show the
arrow blinking on the day of the week�
- Use button
to select the desired day�
When creating a program it is always advised to begin with Monday.
- Use button
to select the time; the display will show
00:00
and next to it the set temperature level
T1
or
T2
or
T3
�
- Use button
to set the value of the desired temperature level; the display will change the histogram according to
the setting�
- Use button
to select the following times (from
01.00
to
23:00
) and use button
to set the value of
the desired temperature level for each one of them�
The display will show the histogram of the selection�
