19
- Use button
to select the desired temperature value then press button
to confirm or button
to cancel
the operation� If the setting is not confirmed within approximately 40 seconds, the chronothermostat will return to the
previously set operating mode�
- After selecting
“Timed Manual”
mode
it is possible to change the set temperature value with button
; this change
will be confirmed automatically after approximately 5 seconds�
After setting the chronothermostat in
“Timed Manual”
mode, it is possible to change the duration with button
and then press
to confirm�
The chronothermostat then remains in
Manual
mode for the set length of time at the end of which it returns to the
previously set operating mode�
With button
you can return at any time to the previous operating mode�
• Setting automatic operation
- Repeatedly press button
until the display shows the
Auto
symbol above the blinking histogram for the daily
program schedule�
- Press button
to confirm�
In this case it is possible to temporarily go into manual mode, for example if the desired temperature is different to
the programmed temperature, selecting the value to set with button
and waiting approximately 5 seconds for the
operation to be confirmed�
The new setting will stay active until the next change in the programmed temperature level, after which the stored
program will be restored� During this temporary phase the display shows blinking segments of the hours in which this
temporary mode is on�
To return immediately to the automatic operating mode, press button
�
• Off
- Repeatedly press button
until the display shows OFF and, alongside the temperature value, the
OFF
symbol blinking
- Press button
to confirm� If the setting is not confirmed within approximately 40 seconds, the chronothermostat
will return to the previously set operating mode�
To switch the chronothermostat back on in one of the available operating modes, repeatedly press button
until
the one you want is shown�
