74
6� Using button set the value of the first digit of the new password then press
to confirm;
the display (in the hours field) will show
nEw Pin
and, in the temperature field, the second digit of the
password will blink�
7� Using button set the value of the second digit of the new password then press
to confirm;
the display (in the hours field) will show
nEw Pin
and, in the temperature field, the third digit of the
password will blink�
8� Using button set the value of the third digit of the new password then press
to confirm�
13.10.9 Access to the GSM chronothermostat when the password is enabled
When access to the chronothermostat is protected by the password, to access the configuration
functions it is necessary to enter the correct PIN�
The display, in the hours field, will show the request to enter the PIN with the word
Pin
and, in the
temperature field, the first digit of the password to be entered will blink�
Using button
set the value of the first digit then press
to confirm; the second digit of the
password will blink on the display�
Using button
set the value of the second digit then press
to confirm; the third digit of the
password will blink on the display�
Using button
set the value of the third digit then press
to confirm�
13.10.10 Viewing the firmware version of the GSM chronothermostat
This function is used to view the version of the firmware in the chronothermostat 01913� To view this
version, proceed as follows:
- Access the GSM menu by simultaneously, and for a few seconds, pressing buttons
and
�
- Using button
select the item
SYSt InFO
and press
to confirm�
- Using button
select the item
FIrM SELF
and press
to confirm�
The display, in the temperature field, will show the version of the firmware in the GSM chronothermostat
01913�
