28
Using
and
you can move respectively between the hours of the day and move
forwards or backwards 15 minutes at a time.
During the movement, as well as the clock, also the "dashes" indicate the time of day in which
you are working. In addition, below the numbers associated with the days of the week, you will
see an icon that identifies the temperature set for that specific time.
The
and
buttons permit changing the set temperature.
Programming ends when the temperatures have been set for all the hours of the day and the
clock displays the time 23:45; then tap
to confirm.
Finally, using
and
, select one of the following options shown in the numeric field of
the display:
: to copy the entire time program for the current day to the next day (useful for repli-
cating working days or holidays).
: to move on to program the next day without making a copy of the day you have
just set (useful when switching between programming working days and holidays).
: to finish programming.
Touch
to confirm the selected option.
8.6 Temperature setting
This menu lets you set the temperatures and hystereses necessary for defining the temperature control
set-point used in the different operating modes.
In particular, you can have setpoints for:
1.
and
: Away temperature (T away) *
2.
and
: Economy temperature (T economy) *
3.
and
: Comfort temperature (T comfort) *
4.
: hysteresis of the device (only if in OnOff adjustment mode)
5.
and
: thermal delta in remote reduction mode
6.
and : “antifreeze” mode temperature (only if in “heating” mode)
* CAUTION: Depending on the mode the timer-thermostat is in (heating or air-conditioning), setting
these setpoints acts only on the value associated with the current mode highlighted by the
or
icon (for example, T.comfort of heating mode)
.
After then changing the setpoints of the current mode in succession, change the mode (see 8.3)
and set all the setpoints corresponding to it.
