Viale Vicenza 14
36063 Marostica VI - Italy
www.vimar.com
Installer guide 04 1901
In the advanced settings, in addition to the parameter “
Radio Power
”, the “
Radio channel width
” must be set, aligning the setting with the access point it is connected
to. In the event of more than one network with the same SSID, using the option “
Connect to this MAC
” it is possible to force the BSSID of the WiFi network you want
to connect to.
In this case, it is vital that the option “
LAN IP
” is set at a different address from the one used for the connected access point; if this is not the case, when “
Save and
Apply
” is selected, once the connection is established, there will be a duplicated address resulting in difficulties accessing the configuration page of both devices.
7. STATUS.
Select “
State -> Panoramic”
to display that status of the network interfaces, any users connected and the system firmware version.
Select “
State -> Graphics
” to display the data traffic trend transiting in the access point.