23
If there are no active calls, the video touch screen will show a window similar to the one shown below.
Self-start function.
This function enables activating audio and video communication on the speech unit without a call being received;
this can be useful, for instance, in the case in which it is wished to check the external zone or an internal zone
where an additional video camera has been installed.
To activate self-starting on the external panel it is necessary to send the SELF-START command.
Repeatedly touching the icon associated with the SELF-START command cyclically performs self-start on any
other secondary panels fitted; the progressive sequence is programmable as a panel parameter (using the PC,
USB 02024 interface and the “EVCom” software.
The self-start on further additional stand-alone video cameras type CCTV (for instance 20560, 14560, 20565,
14565) is constrained by the presence of the audio/video interface 02016.
For greater details see the chapter “AUDIO/VIDEO INTERFACE FOR VIDEO CAMERAS” in this manual.
Conversation Privacy.
The “Conversation Privacy” function enables communicating with the speech unit only if a call has arrived or if a
self-start has been performed; it is not possible to listen to any other communications in progress nor run a self-
start while there a conversation is in progress.
In Two Wire systems the "confidential conversation" function is always enabled.
Video door entry system
Summary of Contents for 21553
