34
9.11 Standby brightness level setting
The menu lets you set the display brightness level when the timer-thermostat goes onto Standby.
Using
and
select one of the 7 available levels and confirm
with
(there is also the ability to turn off the display completely).
9.12 WiFi setting
The menu lets you configure the settings for the WiFi module.
Via
and
you can select:
9.12.1 On/Off
The
menu lets you turn the WiFi module on or off (completely); if it is turned off, in
addition to eliminating any wireless transmission/reception of the device, some of the following
submenus are inhibited.
Using
and
select “
ON
” or “
OFF
” and confirm with
.
9.12.2 Enable Cloud Service
The
menu lets you select whether or not to take advantage of the cloud service offered
by Vimar. If you do not intend to use this service some of the following submenus will be inhibited.
Using
and
select “
ON
” or “
OFF
” to use or not use the cloud service and confirm
with
.
9.12.3 Automatic time synchronization
The
menu enables automatic synchronization of the clock directly from the cloud.
Using
and
select “
ON
” or “
OFF
” to enable or disable clock synchronization and
confirm with
.
9.12.4 First configuration
The
menu enables activating the timer-thermostat configuration procedure with the
App. This procedure lets you (via a smartphone or tablet) configure the WiFi network to which the
timer-thermostat is to connect during normal operation and it lets you program all the functions
of temperature control (for further details please see chap. 6).
Touch
and then
to start the configuration procedure; then follow the instructions
displayed directly on your smartphone/tablet.
