70
Graphic User Interface (GUI) for IP Speed Dome
EN
5.5.2 Port
Go to Config
Network
Port.
HTTP port, Data port and RTSP port can be set.
HTTP Port: The default HTTP port is 80. It can be changed to any port which is not occupied.
Data Port: The default data port is 9008. Please change it as required.
RTSP Port: The default port is 554. Please change it as required.
5.5.3 Central Server
This function is mainly used for connecting network video management system.
1- Check “Enable”.
2- Check the IP address and port of the transfer media server in the CVM. Then enable the auto report in the CVM
when adding a new device. Next, input the remaining information of the device in the CVM. After that, the system
will auto allot a device ID. Please check it in the CVM.
3- Input the above-mentioned server address, server port and device ID in the responding boxes. Click “Save” button
to save the settings.
5.5.4 DDNS Configuration
If your camera is set to use PPPoE as its default network connection, DDNS should be set for network access.
Before you set the DDNS, please make sure you have registered a domain name on the DDNS server.
1- Go to Config
Network
DDNS.
2- Apply for a domain name. Take www. dvrdyndns.com for example.
Input
www.dvrdydns.com
in the IE address bar to visit its website. Then click “Registration” button to register as
shown below.
