Termoscanner
68
EN
6.4 - Network Configuration
6.4.1 - TCP/IPv4
Go to Config
Network
TCP/IPv4. There are two ways for network connection.
- Use IP address. There are two options for IP setup: obtain an IP address auto by DHCP protocol and use the following IP address. Please choose one
of options for your requirements.
- Use PPPoE: Enter the user name and password from your ISP.
You can choose either way of the network connection. If you use PPPoE to connect internet, you will get a dynamic WAN IP address. This IP address will
change frequently. You may use the function of IP change notification.
Trigger Email: when the IP address of the device is changed, a new IP address will be sent to the appointed mailbox automatically
Trigger FTP: when the IP address of the device is changed, a new IP address will be sent to FTP server.
6.4.2 - Port
Go to Config
Network
Port. HTTP port, Data port and RTSP port can be set.
HTTP Port: The default HTTP port is 80. It can be changed to any port which is not occupied.
HTTPS Port: The default HTTPs port is 443. It can be changed to any port which is not occupied.
Data Port: The default data port is 9008. Please change it as required.
RTSP Port: The default port is 554. Please change it as required.
6.4.3 - Server Configuration
Note: To set parameter via the terminal, please tap Touch screen Main Menu
Network Config
Server Config
This function is mainly used for connecting network video management system.
