5
46237.036
Disclaimer for operation of Wi-Fi video cameras
Wi-Fi video camera (art. 46237.036) allow images to be displayed on the purchaser's (hereinafter the
"
Customer's
") smartphone and/or tablet by simply installing the
Vimar Wi-Fi Cam
App.
Image display is dependent on the provision, in the home/building of installation, of a domestic Wi-Fi
network with Internet access, which must have the following characteristics:
• IEEE 802.11 b/g/n standard (2.4 GHz)
Operating mode:
• Networks: WEP, WPA and WPA2.
• TKIP and AES ciphers are supported for WPA and WPA2 networks.
• Hidden SSIDs are not supported.
In order to use the service, the Customer must obtain the technical equipment necessary for the Internet
connection and sign a contract with an ISP (Internet Service Provider), which may involve costs. Vimar
has absolutely no involvement in the choice of technical equipment or the ISP (Internet Service Provider)
contract. The cost of the data traffic necessary for use of the
Vimar Wi-Fi Cam App, both inside the home/
building and beyond the Wi-Fi network created by the Customer for its installation, will be payable by the
Customer.
Remote interaction and correct operation via the
Vimar Wi-Fi Cam App, using the Internet network of
the chosen telephone/mobile data service provider and the Customer-installed Wi-Fi video camera (art.
46237.036), may depend on:
a) type, brand and model of smartphone or tablet;
b) Wi-Fi signal quality;
c) type of domestic Internet access contract;
d) type of data contract on the smartphone and tablet.
Video camera (art. 46237.036) use a P2P connection, and Customers must therefore check that their
chosen ISP (Internet Service Provider) does not block connections of this type.
Vimar has no liability for any malfunctions due to failure to comply with the minimal technical specifications
necessary for operation of the product, as specified above and as referred to in the "Problem-Solving and
Advice" section of this quick guide, and in the "Manual for Connection and Use of the P2P IP Wi-Fi Video
Camera" available in the product information at faidate.vimar.com.
The Customer must enter a password of his own choice. In the event that the Customer requests after-
sales service from the Vimar Service Centre, the access credentials will be requested in order to enable
the service to access the system. The password MUST BE CHANGED after any such operation. Data
acquired during the after-sales period will be processed in accordance with the provisions of our product
personal data processing policy, available at www.vimar.com, for the sole purpose of providing the service
requested by the Customer.
EN
