ENGLISH - 7
4.3 Thermostat Manager Menu
This function is used for programming or excluding secondary
thermostats.
Press the combination
+
.
Use the key to select the desired function, scrolling through the
sequence beginning with the function
.
4.4 Show firmware version and revision Menu
This function displays the firmware version and revision number of
the Radio Base Station, of the Radio actuators or of the Internal
Communication Interface, according to which is selected.
Press the combination
+ for a few seconds.
Use the key to select the desired function, scrolling through the
sequence beginning with the function
.
Press
to confirm or
to cancel.
Receive configuration on secondary thermostat
(carry out only from secondary thermostat)
Key
Display
Description
Send configuration from primary thermostat
(carry out only from primary thermostat)
Eliminate secondary thermostat
(carry out only from primary thermostat)
Show thermostat firmware version
Show firmware version of radio relay actuator (requires
selecting the device via the programming button)
Show firmware version of internal communication
interface
Show firmware version of radio base station
Key Display Description
After selecting the desired item, three digits will appear on the
display: the first two correspond to the firmware version, and the
third is the revision number.
