14
0
1
2
3
4
5
6
7502050
7) APPENDIX 3
- Diagnostic display
Display
Code
Meaning
Self help action
None
No display.
Press the toggle switch and see if display comes on.
Check that the main power switch on the lift is turned on.
If this does not clear the fault, contact your Vimec Servi-
ce Centre.
--
OK
0
Limit switch acti-
vated.
Check that the keyswitch is on and seat is fully swivelled
to the drive position. If this does not clear the fault,
contact your Vimec Service Centre.
1
Requires char-
ge.
The stairlift batteries require charging. Drive the lift to
the charge contacts if the ‘Okay’ code does not show
contact your Vimec Service Centre.
2
Not recharged
Check that the battery charge is plugged. If it is plugged,
contact the Vimec service centre.
3
Over-run micro-
switch activated.
Contact your Vimec Service Centre.
4
Safety edge (up/
down direction)
activated foo-
tplate.
Contact your Vimec Service Centre.
5
Final over-run
microswitch
activate
Contact your Vimec Service Centre.
6
A switch is active
i.e. Toggle Up,
Toggle
Down, IR Up, IR
Down or Learn.
Contact your Vimec Service Centre.
