General Safety Summary
Review the following safety precautions to avoid injury and prevent damage to this
product or any products connected to it. To avoid potential hazards, use the product only
as specified.
Only qualified personnel should perform service procedures.
Injury Precautions
•
Use proper Power Cord –
To avoid fire hazard, use only the power cord supplied with this product.
•
Avoid Electric Overload –
To avoid electrical shock or fire hazard, do not apply a voltage to a terminal
that is outside the range specified for that terminal.
•
Avoid Electric Shock –
To avoid injury or loss of life, do not connect or disconnect line cord while it is
connected to the line voltage.
•
Ground the Product
– This product is grounded through the grounding conductor of the power cord. To
avoid electrical shock, the grounding connector must be connected to earth ground. Before making
connections to the input or output terminals of the product, ensure that the product is properly grounded.
DO NOT DEFEAT THE GROUND CONNECTION ON THE SUPPLIED LINE CORD.
•
Do Not Operate Without Covers
– To avoid electric shock or fire hazard, do not operate this product
with case or panels removed.
•
Use Proper Fuse
– To avoid fire hazard, use only the fuse type and rating specified for this product.
•
Do Not operate in Wet/Damp Conditions
– To avoid electric shock, do not operate this product in wet
or damp conditions.
•
Do Not Operate in an Explosive Atmosphere
– To avoid injury or fire hazard, do not operate this
product in an explosive atmosphere.
Product Damage Precautions
•
Use Proper Power Source
– Do not operate this product from a power source that applies more than the
voltage specified.
•
Provide Proper Ventilation –
To prevent product overheating, provide proper ventilation.
•
Do Not Operate with Suspected Failures –
If you suspect there is damage to this product, have it
inspected by qualified service personnel.
VMM-D1 & VMM-T1 User Manual
6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
