Vincent
39
ADVANCED PLAYBACK FUNCTIONS
Operation
Button(s)
Description
Program the
playback order
PGM (30)
With this function it is possible to set up a desired playing sequence of the CD
tracks. This also allows you to play a smaller selection of your own choice
from all the CD tracks. This programming can only be done with the remote
control. The “program” is set up by the following procedure:
• Press the PGM button
• Enter the numbers of all the desired tracks one after the other on the
number pad (20) of the remote control. For track 10 use the "10” but-
ton. For all other two-figure track numbers first press the “+10” button
as many times as necessary until the number of 10’s is correct, then
press the button for the last figure (for track 23 press the “+10” but-
ton twice and the “3" button once).
• To confirm the program press “PGM” or “PLAY/PAUSE” (5)(24). The
program will be run immediately. If the “REPEAT” function (11)(23) is
not then operated, the program will run once and then be deleted.
The “REPEAT” play function (11)(23) can also be applied to the programmed
track selection. In this case, even if “STOP” (6)(26) is pressed, the program
remains in the memory and it will run again with the next play. You can see
on the display from the text “PGM” that a program is active. It is only if you
press “CANCEL” (29), eject the CD or switch off the CD player that your own
playing sequence is deleted.
Indication of the
remaining playing time
REMAIN (19)
After pressing this remote control key while the CD is playing, the remaining
time of the current track will be shown (indicated by the text “REMAIN" in the
display (10)). Pressing the key again switches the display to the remaining
playing time of the entire CD or the entire program, with the display then sho-
wing “REMAIN ALL”. Pressing the key a third time switches back to the normal
playing time display.
OPERATING THE APPLIANCE
PLAYING HDCDS
Any HDCD inserted is recognised automatically.
The HDCD LED will only light up if an HDCD is
inserted, if it has been started and if the output
level of the analogue outputs has been set to its
maximum value of “26” (“VOL” keys (34)(35)).
The HDCD signal will only be decoded if this dis-
play lights up!
Summary of Contents for CD-S1.1
Page 10: ...10 Vincent TASTEN DER FERNBEDIENUNG 20 18 28 21 23 24 26 27 19 30 31 22 33 32 34 25 35 29...
Page 30: ...30 Vincent BUTTONS OF THE REMOTE CONTROL 20 18 28 21 23 24 26 27 19 30 31 22 33 32 34 25 35 29...
Page 50: ...50 Vincent TOUCHES DE LA TELECOMMANDE 20 18 28 21 23 24 26 27 19 30 31 22 33 32 34 25 35 29...
