36
Vincent
OPERATION OF THE UNIT – UKW
Action
Description
Hear FM stations
1. Press the POWER button (8) key to turn on the device.
2. On the display, press the DAB / FM button (4 / 18)
to select the FM band transmitter.
3. Select the desired channel.
a. Auto tuning selection
With the AUTO button (5 / 19) automatically set a station.
If a station has been set, the process stops automatically.
b. Manual tuning
To set a channel, press the TUNING button (10/23) - the frequency steps holds 50kHz.
Mono/Stereo Mode
If a Stereo sound transmitter has been set, press the ENTER key (7 / 21) to switch between
mono and stereo. To compensate a weak FM stereo reception, select the mono mode and
the reception is done with less noise.
RDS Info Display History
With "Auto Tuning" (5 / 19) or "Manual tuning" (10/23) with a frequency RDS signal
and adjust to the INFO button (6 / 20) button to start the RDS reception and the dis-
play runs each time you press the Info button.
This data is transmitted from the transmitter:
a. Program Name
b. Radio Text
c. Program Type
d. Date and Time
Preset Transmitter sites
a. Adjust "Auto Tuning" (5 / 19) or "Manual tuning" of the transmitter which is entered in
the memory.
b. Press and hold the channel buttons (16) on the remote control for 2 seconds,
then the display shows "Preset XX saved" and the process is running.
