11
5.7 Replace the guide rail
1.
As shown in Figure 1, remove 3 screws on the left and right of the fixed wood frame;
2.
As shown in Figure 2, remove 8 fixed screws at the left and right guide rail;
3.
Change new guide rails. Align the inner tank steps underneath and below, and fix 4 screws on the left
and right;
4.
Pre-fix the wooden supports, and then pull and push them, and fasten these 6 screws after they are
unblocked.
Figure 1
Figure 2
5.8 Installation of the handle
1.
Remove the door gasket on the side of the handle you want to install, and you will see two holes
specially designed for the installation of the handle.
2.
As shown in the figure above, use two screws to install the handle. Lock up the gasket and the flat
washer provided.
3.
Cheng the door gasket.
Gasket
Flat washer
Lockup washer
Screw
Handle
Door frame
