9
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
i n f o @ v i n o t e m p . c o m
POWER
To control this appliance turn on/off. To turn OFF the appliance, touch and hold the
mark for 5 seconds.
LIGHT
To control the inner light turn on/off.
UP
Used to raise (warm) the set temperature by 1°C or 1ºF.
DOWN
Used to lower (cool) the set temperature by 1°C or 1ºF.
ºF/ºC
Selector
Select the temperature display setting in Fahrenheit or Celsius degree. To change the
temperature from Fahrenheit to Celsius or from Celsius to Fahrenheit, touch and hold
mark for 5 seconds.
KEY LOCK
The controls will be locked automatically after two minutes. To release the lock, touch
the and marks at the same time for at least 5 seconds.
SETTING A TEMPERATURE
You can set the temperature as required by pressing the
UP
or
DOWN
button. When
you press the two buttons for the first time, the LED readout will show the original
temperature set previously (the temperature preset at the factory is 54ºF/12°C).
The temperature will increase 1ºF/1°C if you press the
UP
button once, or the
temperature will decrease 1ºF/1°C if you press the
DOWN
button once.
To view the “set” temperature at any time, press the
UP
or
DOWN
button, the “set”
temperature will temporarily “flash” in the LED display for 5 seconds.
The internal storage temperature will appear in blue color in the temperature display
window.
NOTE
: When using the unit for the first time or after a long period of inactivity, there
may be a variance of a few degrees between the selected temperature and the
temperature indicated on the LED readout. This is normal due to the length of inactivity,
and will correct itself after the unit is run for a few hours. If the unit is unplugged, has
lost power or is turned off, wait 3 to 5 minutes before restarting the unit. The unit will
not restart before this time delay.
