BEER DISPENSER TROUBLESHOOTING GUIDE
You can solve many common problems easily, saving you the cost of a possible service call.
Try the suggestion below to see if you can solve the problem before contacting Vinotemp
at info@vinotemp.com.
PROBLEM
POSSIBLE CAUSE
Beer dispenser does not
operate
•
Not plugged in.
•
Circuit breaker tripped or a blown fuse.
•
The temperature control knob is set in “OFF” position.
Turns on and off frequently
•
Room temperature is hotter than normal.
•
Appliance door is open too often.
•
Door is not closed completely.
•
Temperature control is not set correctly.
•
Door gasket does not seal properly.
•
Beer dispenser does not have the correct clearances.
Vibrations
•
Check to assure that the beer dispenser is leveled.
Beer Dispenser seems to
make too much noise
•
Rattling noise may come from the flow of the
refrigerant; this is normal.
•
As each cycle ends, you may hear gurgling sounds
caused by the flow of refrigerant in your beer
dispenser.
•
Contraction and expansion of the inside walls may
cause popping and crackling noises.
•
Beer dispenser is not leveled properly.
Door will not close properly
•
Beer dispenser is not leveled.
•
Door was reversed and not properly installed.
•
Door gasket is dirty.
•
The shelves, metal plate, or beer keg are out of proper
position.
TECHNICAL SPECIFICATIONS
Model No.
V
18
W W W . V I N O T E M P . C O M
V
T
T
-
-
F
F
U
U
L
L
L
L
K
K
E
E
G
G
Power
115V/60Hz
Rated Current
1.4A
Power Input
115W
Power Consumption
1.0 kW.h/24h
Refrigerant
R134a/3 oz
Size (W x D x H)
23.6" x 23.6" x 33.5"
