- - 12 - -
4012M indicates the total capacity of your
master disc.
0/21 indicates you have a project size of
twenty-one copies and you have made zero
copies thus far.
10% indicates the current percentage of the
copying progress.
401M indicates the current amount of data
that has been copied from the master disc.
4012M indicates the total capacity of your
master disc.
0 indicates you have made zero copies thus far.
10% indicates the current percentage of the
copying progress.
401M indicates the current amount of data
that has been copied from the master disc.
Step 3:
Once the Counter selection is submitted, you shall see the following “Waiting for
Master” screen and EVERY tray that does not contain any disc(s) in them will automatically
be ejected:
Step 4:
After you’ve placed your master disc in the Source Drive, you will see following
screen:
Step 5:
After you’ve placed all the blank discs throughout the chain, please press the
ENT/Enter button to start the job. All trays will be closed at the same time and you will see
the following screen:
All rewritable media is requires to be erased prior copying. All non-erased
rewritable media will be failed. (Only exceptions are formatted DVD+RW media)
Step 6:
After 10 or 15 seconds of processing time, one of the following Copy progress
screens will appear. The left-hand screen is shown when “Specify Counter” is selected and
the right-hand screen is shown when “No Counter” is selected.
When “Specify Counter” is selected:
When “No Counter” is selected:
It is normal to see the progress indicator stay at 0% up to 1 minute. That is
caused by the initializing and finalizing stages.
Preparing
Waiting for Master
Please insert disc
Press ENT to Start
Copying... 4012M
0/21 10% 401M
Copying ... 4012M
0 10% 401M
Preparing
Please Wait