- - 24 - -
Chapter 5: Menu Overview
1. COPY
This menu will guide you to make CD/DVD/BD copies. For more information,
please refer
to
“Mak
e Disc-to-
Disc Copies” on page
10
or
“Mak
e Hard Drive-to-Disc Copies on page 14
.
2. TEST
This menu will guide you to make a simulation of the copying process. During this
simulation process, all write once recordable discs such as (DVD-R, CD-R) will be reusable.
The purpose of performing such simulation is to ensure error free duplication.
Due to the physical limitation of DVD+R/RW & BD-R/RE recordable format, you
can not perform this procedure on these formats. If you do so, you will encounter
a failure messages.
If you are using CD-RW/DVD-RW discs as your blank media during the
simulation, any content that may have been recorded inside those discs will be
permanently ereased.
3. COMPARE
This menu will guide you to perform a bit-by-bit comparison between your master disc (or
master disc image on the hard drive) and all the copied discs. The reason to perform this
compare operation is to ensure all of your copies identically compare to the master disc.
4. TEST + COPY
This menu will guide you to perform the simulation of copying process and if everything
passes during the simulation, the real copying process will be performed. If there’s an error
encountered during the simulation, an error message will be displayed and the copying
process will not be initiated.
5. COPY + COMPARE
This menu will guide you to make copies, after which, it will perform an additional
comparison process automatically to ensure data correctness.
6. SELECT BURN SPEED
This menu will guide you to adjust the duplication speed on various duplication job types.
For more information, please refer to
“
Select the Duplication Speed
”
on page 21.
7. SELECT SOURCE
This menu will guide you to select a Reader/Writer drive as the source drive (where your
master disc will be placed into) for Copy related operations. For more information, please
refer to
section 1 of
“
Make Disc-to-
Disc Copies”
-
“
Select the Copy Source
” on page
10.
8. ERASE
This menu will guide you to erase your rewriteable discs in the Writer Tray. There are two
options to erase your rewriteable discs:
Full Erase: It will erase the entire disc which will make it impossible to be recovered.
Quick Erase: It will erase the index of the rewritable disc, not the data section.
