- 31 -
10.8 Display Order
This function will allow you to change the display order of the existing partitions/images
in the hard drive. The default setting is in a chronological order.
11. MIX AUDIO TRACKS
This process will guide you to mix an Audio CD from various tracks among different Audio
CDs. For more information, please refer to
“Mix Audio Tracks” on page 21
.
12. SETUP
12.1 Language
This setting will allow you to choose which language you prefer be used to navigate
the controller function of this system.
12.2 Auto Start
This setting allows you to choose Auto, Full, or Off. If Auto is selected, this feature
automatically starts the duplication process when all writer drives detect recordable
media inside, or waits for 30 seconds before starting the duplication process if there is
at least one recordable disc in a writer drive and any of the remaining writer drives are
empty. If Full is selected, this feature allows the system to copy automatically once
your master disc and all of the writer trays of the system are filled with recordable
media, but will not start automatically if any writer drives remain empty. If Off is
selected, the copy process requires you to press the ENT/Enter button to start the
duplication. This feature applies to applications inside the operation menu such as
COPY, TEST, TEST+COPY, COPY+COMPARE, etc.
12.3 Read Error Skip
Normally, when the system encounters a reading error while reading your master disc,
the duplication job will be aborted and all the recordable media will be ruined. However,
if you believe that your master disc has a small, insignificant error due to physical
damages, you can enable the setting to allow the system to skip any read error* it
encounters.
*This function will not fix the error; it will only skip it to make the rest of the data
readable.
12.4 CD
Writing Mode
This setting will allow you to select which mode you would like to duplicate a CD.
There are two different modes, “Disc at Once” and “Track at Once”. Unless you
understand completely what they mean, we strongly suggest you to set it as “Disc at
Once”.
12.5 Max Audio, VCD & CDG Speed
Audio CD’s and Video CD’s do not have internal error checking capability, so
duplicating at too high a speed may cause frequent errors. This setting will allow you to
adjust the maximum duplication speed for Audio and Video CD.
12.6 Buzzer
This setting will allow you to choose whether you want to hear a beep when you press
a button or when a task has been completed.
