- 34 -
13.7 Save
This function will save all the settings you’ve modified since the last time the system
was booted.
14. Account Management
This menu will allow the Administrator to perform the following user administrative tasks.
This feature is disabled by default. Prior to activating this feature, the duplicator recognizes
all users as the only activated user defined as the administrator. The pre-defined
password for this menu is “0000”.
14.1 View User
This menu allows you to view current existing user accounts.
14.2 Create User
This menu allows you to create additional user accounts. Each user has its own
settings. During this process, you will be prompted to enter a new user name (up to 8
alphanumeric letters or numbers) and user password (consists of a 4 digit number) for
a new account.
14.3 Edit User Info
This menu allows you to change the existing user account’s name and password.
During this process, you will be asked to select the existing account and then you will
be prompted to enter the new user name and new user password for this account.
User “Admin” is the administrative account, you can NOT change the user name
for this account, but you will be able to change the password for this account.
14.4 Delete User
This menu allows you to delete the existing user account. During this process, you will
be asked to select the existing account to be removed.
User “Admin” is the administrative account; you can NOT delete this account.
14.5 Password on Bootup
This menu allows you to enable/disable the user administrative feature prompt; user
login upon boot up. During this process, you will be asked to select “ON” or “OFF”
(enable/disable).
15. AUTOCOPY
This function will allow the system to operate the disc-to-disc copy function without any
user inputs for ease of operation.
16. Shutdown
This function saves any system settings that you have entered and makes sure it is safe to
turn off your system. Once you see the
Ready to Power OFF
message, then you can
