- 42 -
Error
Code
Error Message
Description & Recommended Solutions
240
Wrong
Password!
Description:
The password entered is not correct
Possible Solution:
Please confirm you typed in the correct password or try a different
password.
241 Login
Failed
Description:
An incorrect password was entered 3 times consecutively
Possible Solution:
Wait for 5 minutes, then try to use the correct password for next the
attempt. If the problem persists, call Tech Support.
250
Source Cannot
Be HDD
Description:
The source is configured in the hard drive when trying to perform the
Mix Audio Tracks function.
Possible Solution:
Change the Copy source to the Reader.
251
Copy Audio
Error
Description:
An error occurred during the mixing process of your audio CD.
Possible Solution:
Try a different master or blank disc.
252 Not
Audio
CD
Description:
The Master Disc is not an Audio CD when preparing the mixing
process.
Possible Solution:
Please verify your master disc is an Audio CD.
253
Over Blank Disc
Capacity
Description:
The total size of the selected tracks is larger than the capacity of the
target blank disc during the track selection process.
Possible Solution:
Try to select an alternative track with a smaller capacity.
260 No
Update
File
Description:
The system can NOT locate the Firmware Update File during the
Update Firmware process.
Possible Solution:
1. Confirm the file is not a “zip” file. If it is, please extract it before
you burn it into a CD.
2. Confirm the update file is written as “Mode 1” Data CD. Usually a
Data CD created with Windows XP or Roxio’s Drag-to-Disc is not in
this format. Please use a software like Nero Burning ROM.
3. Make sure there are no other discs in the system and try to insert
the update disc into another tray to perform the operation.
