EVAPORATOR INSTALLATION
8
INSTALL THE (2) DEFROSTER VENTS UNDER DASH AS SHOWN IN FIGURE 6 BELOW. SECURE
USING (2) #8 x ½” PH PAN HEAD SCREWS.
INSTALL THE NEW DRIVER & PASSENGER SIDE FRESH AIR COVERS, SECURE USING OEM
HARDWARE. SEE FIGURE 6 BELOW.
LAY THE EVAPORATOR UNIT ON THE FLOOR UNDER DASH, AT THIS TIME LUBRICATE A #6
O-RING (SEE FIGURE 11 & 11a, PAGE 11) AND INSTALL THE #6 HARDLINE ON TO EVAPORATOR.
SEE FIGURE 14, PAGE 14.
ATTACH CONTROL CABLES TO EVAPORATOR. SEE FIGURES 7A & 7B BELOW.
INSTALL THE DRIVER SIDE MOUNTING BRACKET AND THE BLOWER HOUSING MOUNTING
BRACKET, SEE FIGURE 7 BELOW. SECURE BRACKETS USING (2) #8 x ½”PH PAN HEAD SCREWS.
FIGURE 6
EVAPORATOR
ROTATE THE UNIT
90° WILE LIFTING
INTO POSITION
PASSENGER SIDE
FRESH AIR COVER
PASSENGER SIDE
DEFROSTER
DRIVER SIDE
DEFROSTER
DRIVER SIDE
FRESH AIR COVER
ANGLE
TEMPERATURE
CABLE 27 1/8”
DEFROST
CABLE 19 1/2”
EVAPORATOR
FIGURE 7B
PUSH ON
RING
BLOWER
HOUSING
BRACKET
PUSH ON
RING
BRACKET
EVAPORATOR
BRACKET
HEAT/DEFROST
DOOR CABLE
FIGURE 7
FIGURE 7A
DRIVER SIDE
MOUNTING
BRACKET
1969 CAMARO
w/o FACTORY AIR
905070-VCZ-A
, 69 CAMARO w/o FAC. AIR INSTRUCTIONS PG 8 OF 20
11/22/05
