11
TROUBLESHOOTING GUIDE
Common problems may easily be solved, saving you the cost of a possible service call.
Please read carefully the instruction manual and revert to troubleshooting guide chart.
PROBLEM POSSIBLE
CAUSE
Beverage center does not operate.
Not plugged in.
The appliance is turned off.
The circuit breaker tripped or the fuse is broken.
Beverage center is not cold enough.
Check the temperature control setting.
External environment may require a higher setting.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
Turns on and off frequently.
The room temperature is hotter than normal.
A large amount of contents has been added to the
Beverage center.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
The light does not work.
Not plugged in.
The circuit breaker tripped or a blown fuse.
The light is out of order.
The light button is “OFF”.
Vibrations.
Check to assure that the Beverage Center is level.
The Beverage center seems to make
too much noise.
The rattling noise may come from the flow of the
refrigerant, which is normal.
As each cycle ends, you may hear gurgling sounds
caused by the flow of refrigerant in your Beverage
center.
Contraction and expansion of the inside walls may
cause popping and crackling noises.
The Beverage Center is not level.
The door will not close properly.
The Beverage Center is not level.
The door was reversed and not properly installed.
The gasket is faulty. ( magnet or rubber is spoiled)
The shelves are out of position.
