V30SGME V30SGMEBK V30SGES3 AL-V30SGE
10
User Manual
TURNING ON YOUR WINE CELLAR
Plug in and switch on the cellar by pressing on the power button
for a few seconds.
When you use the wine cellar for the first time (or restart the wine cellar after having it
shut off for a long time), there will be a few degrees variance between the temperature you
have selected and the one indicated on the LED readout. This is normal and it is due to
the length of the activation time. Once the wine cellar is running for a few hours
everything will stabilize.
Important: If the unit is unplugged, power is lost, or turned off, wait 3 to 5 minutes
before restarting the unit. The wine cellar will not start if you attempt to restart before
this time delay.
Operating Noises
To reach the desired temperature settings,
VINTEC
wine cellars, like all wine cellars
operating with compressors and fans, may produce the following types of noises. These
noises are normal and may occur as follows:
- Gurgling sound - caused by the refrigerant flowing through the appliance’s coils.
- Cracking/popping sounds - resulting from the contraction and expansion of the
refrigerant gas to produce cold.
- Fan operating sound - to circulate the air within the wine cellar.
An individual’s perception of noise is directly linked to the environment in which the wine
cellar is located, as well the specific type of models.
VINTEC
wine cellars are in line with
international standards for such appliance.
VINTEC
will always do its utmost to satisfy its
customers but will not retake possession of the goods due to complaints based on normal
operating noise occurrences.
