14
Maintenance
The Lens Drive requires minimal routine maintenance, apart from
regular cleaning and routine checks.
Routine checks
During use, check the following daily:
•
Check cables for signs of wear or damage. Replace as necessary.
•
Check that all cables are connected properly.
Cleaning
WARNING! Risk of electric shock .
Disconnect and
isolate the product from the power supply before
cleaning.
During normal use the only cleaning required should be a regular
wipe over with a dry, lint-free cloth. Dirt accumulated during storage or
periods of disuse may be removed with a vacuum cleaner. Particular
attention should be paid to all connection ports on the Lens Drive.
Firmware Update
1.
Download the latest firmware update (www.vinten.com/en/
service-support) and install it in the root directory of USB thumb
drive.
2.
Remove the USB cover from the Drive box.
3.
Insert the thumb drive into the USB socket.
4. Hold down the Iris button and connect the power supply.
5.
The LED’s will start to flash and the Iris button can be released.
6. The firmware update will take approximately 30 seconds to
complete, confirmed by a solid LED.
!
CAUTION! Do not
disconnect the power supply while the
drive box is updating the firmware
