ATTENTION
To prevent the door gasket damage, make sure to have the door all the way
opened when pulling shelves out of the rail compartment.
The Wine Cellar must be positioned with the plug accessible area. Release the
power cord and move your cabinet to its final location. Do not move your Wine
Cellar while loaded with wine. You might distort the body with inappropriate
impact. The Wine Cellar should be installed in a suitable place in order to avoid
touching the compressor by hand.
If the door hinge need to adjust for your desired direction, it has to be carried out
by a certified electrician or your local authorized service centre to avoid
inappropriate impact on operation.
If the supply cord is damaged, it must be replaced by a certified electrician or
your local authorized service centre.
Store wine in sealed bottles.
Do not overload the Wine Cellar.
Do not open the door unless necessary to avoid temperature fluctuation.
Do not cover shelves with aluminum foil or any other shelf material which may
prevent air circulation.
Should the Wine Cellar be stored without use for long period, it is suggested that,
after a careful cleaning, leave the door ajar to allow air to circulate inside the wine
cellar. This will avoid possible formations of condensation, mold or odors.
Note:
1.
The information of this user manual and the specifications may change due
to product improvement without prior notice.
2. Warranty applies to the Wine Cellar only and do not apply to the contents of
the Wine Cellar. We are not responsible for any damage to the wines or any
other contents inside the Wine Cellar.
3. The Wine Cellar should be placed under 5
o
C to 35
o
C ambient temperature. If
the ambient temperature is out of this range, the performance of the wine
cellar may be affected.
Summary of Contents for Grand Cru Classe VZ110BDHK
Page 15: ......
