5
OPERATING YOUR WINE CELLAR
The wine cellar should be placed in where the ambient temperature is between 0-35
℃
(32-95 degrees
Fahrenheit
)
. If the ambient temperature is above or below this range, the performance of the unit may
be affected. For example, placing your machine in extreme cold or hot conditions may cause interior
temperatures to fluctuate. The range of 5 -18
℃
(40-65 degrees Fahrenheit
)
may not be reached.
The controls of your Wine Cellar
•
RUN
Indicator light illuminates to signify the cooling mode is currently in operation.
•
Light
To control the inner light turn on/off.
•
Power
To control this
wine cellar turn on/off.
•
“Set Upper” Button
To set upper compartment’s temperature. Each press of the buttons will scroll through
the available temperature settings in increments of 1 degree
•
“Set Lower” Button
To set lower compartment’s temperature. Each press of the buttons will scroll through
the available temperature settings in increments of 1 degree
•
“Upper Chamber”
Display the upper compartment’s temperature
•
“Lower Chamber”
Display the lower compartment’s temperature
Setting the Temperature Control
•
You can set the temperature as you desire by pressing the
Set Upper
or
Set Lower
button. When
you press the two buttons for the first time, the LED readout will show the original temperature set
at previous time.
The temperature preset at the factory are
:
Upper compartment: 6
℃
℃
℃
℃
Lower compartment:
12
℃
℃
℃
℃
•
The temperature that you desire to set will increase 1ºC if you press the
Set Upper
button once, on
the contrary the temperature will decrease 1ºC if you press the
Set Lower
button once.
Upper compartment
: The temperature setting can be adjusted from 5
℃
to 12
℃
.
Lower compartment:
The temperature setting can be adjusted from 12
℃
to 18
℃
.
To view the “set” temperature, press
and hold the corresponding button for approximately
5 seconds anytime, the “set” temperature will temporarily “flash” in the LED display for 5 seconds.
