Pressing SELECT to choose a setting changes the setting white again to confirm the change has
been made.
ENABLE REMOTE: Yes or No
REMOTE I.D.: 0-9, (Matching Remote Control I.D. setting)
SPEAKER VOLUME: 0-9
MIC
LEVEL:
0-9
TIME & DATE: hh:mm & mm/dd/yyyy
IMAGE STABILIZATION: On or Off
FRAME RATE: 30, 25, 24, 15fps
VIDEO RESOLUTION: 720x480, 720x400, 640x480, 360x240, 360x200, 320x240
VIDEO QUALITY: High, medium, low
EDGE ENHANCEMENT: Off, 1, 2, 3, 4
SATURATION REDUCTION: None, 25%, 50%, 75%, 100%
TARGET LUMINANCE: 1-9
TARGET PEAK LUMINANCE: 1-9
REC SETTLING TIME: 0.3, 0.4, 0.5, 0.6, 0.8, 1.0, 1.2, 1.6, 2.0 sec.
RECORD MODE: Clip, Loop, Still
LOOP RECORD TIME: 20, 30 sec., 1, 2, 3, 5, 10, 15, 30 min.
LCD SLEEP TIMEOUT: Never, after 15 sec., 1, 2, 3, 5, 10, 15, 30 min.
POWER OFF TIMEOUT: 20 sec., 1, 2, 3, 5, 10, 15, 30 min.
DISPLAY BRIGHTNESS: 1-10
FORMAT SD CARD: Yes or No. (WARNING: formatting erases SD card)
VIDEO OUTPUT: NTSC, PAL
HARDWEAR VERSION: indication only
FIRMWARE
VERSION:
indication
only
Connecting to a PC
The included USB cable allows connection between the POV.1 and a PC. Before making the
connection, install POV.1 Manager from the included POV.1 CD. When the USB cable is
connected, the POV.1 automatically changes to USB mode. Follow the instruction in the POV.1
Manager User Guide included on the POV.1 CD.
Connecting to a Mac (10.3.9+)
The included USB cable allows connection between the POV.1 and a Macintosh. Before making
the connection, install DivX from the included POV.1 CD. When the USB cable is connected,
the POV.1 automatically changes to USB mode.
The POV.1 SD card will appear as a connected drive on a Macintosh. You can access and
download clips by opening POV.1/DCIM/100Coach.
Remote Control
The Remote Control can be used to start and stop recording and tag.
