Installation
1. Do not install / mount the camera in a location that interferes with
the driver’s visibility and safety.
2. Install / mount the camera close to the rearview mirror so that
both sides of the scene being recorded are equally covered by the
camera’s FOV (field of view).
3. To ensure a clear view on rainy days, the lens should be positioned
within the windshield wiper’s sweeping range.
4. Do not install / mount the camera on or near airbag panels.
5. Installation / mounting location should not be affected by sun
control film (window tint). There should not be any other electronic
equipment close to the camera for optimal performance.
Note:
Do not install / mount the camera or cables near an airbag panel or
within the airbag’s working range. The manufacturer is not liable for
any injury or death caused by the deployment of the airbag.
Tips
Operation
Loop Recording
Insert a micro SD card into the camera’s card slot and automatic loop
recording will begin once the camera detects power.
Time frame for each video file is 1 / 2 / 3 / 5 / 10 minutes.
When there is insufficient space on the Micro SD card, loop recording
will automatically overwrite the oldest files (one by one).
Loop recording files are saved to SD card: \ DCIM \ MOVIE folder.
1.
1.
2.
3.
2.
3.
4.
Operation
Power On / Off
When you start the engine, the camera will turn on and begin
recording automatically.
When you turn off the engine or unplug the charging cable from
the power adapter, the camera will stop recording and turn off.
Long press [ ] button to power on or off the camera.
14
13
Display Overview
00:00:20
2019-07-01 08 26 15
: :
4k 30fps
00
Recording Status
Emergency Lock
Parking Mode Recording
Recording Mode
4k 30fps
:00:00
Recording Time
Video Resolution
Microphone
Wi-Fi
WDR
GPS
SD Card
