LCD PANEL INDICATIONS
1.
Ready
: Indicates chamber is ready to disinfect or the device is ready after disinfection. The UVC
lights are off.
2.
Quick Clean
: Quick Clean Cycle in progress. Averages 15-20 seconds from start of process at door
closure. Once the Quick Clean Cycle is completed, you can safely remove the device from the
chamber at your discretion. UVC lights are on during the Quick Clean Cycle and will continue to
remain on through the following Deep Clean Cycle.
3.
Deep Clean
: Deep Clean Cycle in progress. Immediately follows Quick Clean Cycle. Averages a
total time of 90-180 seconds from start of process at door closure. Once the Deep Clean Cycle is
completed, you can safely remove the device from the chamber at your discretion. UVC lights are
on during the Deep Clean Cycle but will turn off upon completion.
4.
Status Bar
: The Status Bar tracks the UVC Disinfecting Cycle. The bar will fill from left to right, with
a designation line defining the end of the Quick Clean Cycle and the beginning of the Deep Clean
Cycle. It will remain filled until the door is opened, where the bar will then be cleared to show the
unit is ready to start another disinfection cycle.
5.
Error
: Error indicates an issue has occurred with the unit. Please contact support via email or by
phone.
