5. Wireless Network Settings
•
Login to the Arctic web user interface using your web browser.
•
Navigate to
Network-->Mobile WAN
subpage (see figure 4)
Figure 4.
Login to the Arctic web user interface
•
Set Access Point Name (APN)
appropriately (
usually INTERNET or
operatorname.com
). This setting is depends on the mobile operator,
please refer to your operator documentation for the correct APN
setup.
•
Setup other settings if needed (usually
PIN-code, authentication,
username and password
)
•
Reboot Arctic device and check settings from System--> Status page
Figure 4.
Mobile WAN settings
