User Manual
Arctic 3G Gateway
Firmware Version 2.1.x
18
Document Version 3.1
1. Required tools and accessories are: DIN rail mounting kit (2 mounting
brackets and 4 screws), screw driver.
2. Use the screw driver to attach the screws to bottom panel of the Arctic
3G. DIN rail brackets can be installed to either diagonally or horisontally
depending on the wanted DIN rail installation angle.
2.11
Product label
Product label is found on the bottom of the device and it contains the basic
information about the unit such as product name, serial number and Ethernet
MAC address.
Figure 9. Product label
2.12
Accessories
Viola Systems supplies certain accessories for Arctic 3G. Possible
accessories are listed in table 18.
Table 18: Arctic 3G accessories
Accessory
Order code
Serial console adapter: RS232 to RJ45
3170
DIN rail monting kit: 2 DIN rail clips with screws
3003
Optional power supply: 12V/1.5A with universal 100-240VAC
IEC input
3020
Accessory kit: Serial console adapter, Ethernet cables, power
supply
3221