User's Manual
Arctic Communication Gateway
Firmware Version 3.1.5
23
Document Version 1.0
servers are used for resolving names to
IP addresses.
Figure 14. Mobile WAN configuration
To configure the mobile WAN, enable the connection by selecting
"Enable"="Yes" on the top of the page and enter PIN code if set, APN name
and authentication details if needed.
If the Arctic acts as a wireless router to Ethernet devices and DNS is needed,
enter DNS configuration as well. When ready, press the Submit button on the
bottom of the page to save settings.
The Arctic need to be restarted before the mobile WAN configuration is active.
4.1.4
WAN Failover and backup routing settings
WAN Failover screen configures the default gateway settings on the Arctic.