Configuring the 7700 FSP Controller
530-0267-00 Rev 02
7700 Flash Storage Platform Installation Guide 7.6.3.x
59
11.
Navigate to
Overview > Server
in the navigation panel (left-side of main window).
12.
Click
Properties
in the main window, click the
Summary
tab, and click
Launch
in the Virtual
Console Preview pane.
13.
Download the
viewer.jnlp
file, and click
Open
to download and start the session.
Note:
The
viewer.jnlp
file uses a Java Network Launching Protocol file format to launch
the Virtual Console on the local desktop because the web browser perceives this link to the
Virtual Console downloaded file as a remote application.
14.
Accept all Java-based warnings and approval requests.
15.
When the
Using the Appliance Set Up Complete
screen in the Quick Start configuration
utility displays, set all of the necessary values to complete Quick Start.
For details, see
Configuring 7700 FSP Controller Management Access
16.
After the Quick Start utility completes and the 7700 FSP Controller reboots, access the 7700
FSP Controller using SSH connections and Symphony.
Note:
Ensure that you repeat this process on the other 7700 FSP Controller in your system.
Configuring 7700 FSP Controllers at Initial Power
On
To properly configure the 7700 FSP Controllers at initial power on through SCI configuration, you
need to complete the following tasks:
•
Perform initial setup up on 7700 FSP Controllers.
•
Use CLI commands to set new hostname, DNS, NTP, and domain values.
•
Configure 7700 FSP Controllers using CLI commands to set SCI values.
