Manual VIPA HMI
Chapter 2
Deployment Touch Panel
HB160E - TP - RE_62F-DCB0 - Rev. 11/14
2-21
Below is explained, how to establish of a ftp connection between a
Windows
®
based PC (here Windows
®
2000) with Internet Explorer as ftp
client and your Touch Panel.
•
Connect your Touch Panel with the network where your PC is a member
via an Ethernet cable.
•
Switch on your Touch Panel.
As soon as your Touch Panel is connected via Ethernet, you may monitor
the IP address data via
.
•
After you’ve confirmed the pre-settings, start your ftp client and enter the
following text into the "address bar":
•
ftp://wince:vipatp@IP-Adresse
The following window appears:
Here you may execute the requested file operations.
Establishing a
ftp connection