Chapter 2 Deployment Touch Panel
Manual VIPA HMI
2-18
HB160E - TP - RE_62F-CCB0 - Rev. 11/14
The dialog window where to configure the integrated MPI interface is to be
found at
Start
>
Settings
> Control
Panel
>
MPI Configuration
.
HSA
Here you set the highest MPI address (
h
ighest
s
tation
a
ddress). Within a
MPI network the highest MPI address must be identical!
TS
With TS (
t
his
s
tation) you set the local MPI address for the Touch Panel.
Baud Rate
Enter here the transfer velocity of your MPI net. The baud rate has to be
identical for every MPI participant within the network. According to the
Baud Rate
the network parameters are set.
Default Net Parameters
It is recommended not to alter the
Default Net Parameters
that are set by
the baud rate.
Status
The status of the MPI interface is monitored via
Status
as "Offline",
"Online" or "Error".
Note!
Here made changes are also not saved after PowerOFF-PowerON. Save
the data permanently in the current registry file via [Store]
at
Start
>
Programs
>
KuK_Tools > KuK Tools
.
Set MPI parameters
