13
© 2013 Directed. All rights reserved.
Remote Control Configuration
The remote controls have operations that can be configured to a user’s
personal preferences. The following instruction directs you through the
available programming options for both remote controls.
Remote Programming
To Enter Programming:
Press
and
hold
the
button for eight sec-
onds, the transmit LED turns on to indicate the Main Menu is accessed.
To Exit Programming
:
Press
and release the
button once then press
and hold the
button again until the transmit LED shuts off.
Remote Pairing
The following instruction will step you through the remote pairing op-
eration.
Prepare the vehicle system for pairing
:
1.
Open
at least one of the vehicle’s doors
.
2.
Turn
the key to the ON position.
3. Within five seconds
press
and release one time the Control but-
ton on the Control Center.
4. Within five seconds,
press
and
hold
the Control button. The sta-
tus LED will flash one time and the siren will chirp once to confirm
the system is ready for remote pairing.
5.
Release
the Control button and proceed to next step.
Prepare the remote control for pairing:
6. Enter programming to access the Main Menu as explained previ-
ously.
7.
Press
and
hold
the
button for 1 second, 3 transmit LED flash-
es indicate the remote control is ready to pair.
