30
© 2 0 0 5 d i r e c t e d e l e c t r o n i c s , i n c .
Three minutes
after the constant siren output begins, the flashing
indicator lights and the siren will stop. The immobiliser will
remain active until the system is disarmed. If the door is opened
or the ignition is turned off and on in an attempt to restart the
car, the siren and light flashing will begin again.
disarming the vrs
®
Take the time to familiarise yourself with the VRS
®
triggering se-
quence and the disarm procedure. It is important to recognise
and identify the VRS
®
trigger sequence and know how to disarm
it in case of accidental activation.
Once the VRS
®
is armed, it does not disarm automatically. You
must disarm it the next time you operate the vehicle. You must
disarm it with one of the following procedures:
If the system has not entered the triggered sequence (siren has
not started chirping):
1. Turn the ignition on.
2. Press the
button on the remote for one
second. The lights will flash and the siren will
chirp twice.
If the system has entered the triggered sequence (siren has begun
chirping), pressing the
button of the remote will not disarm
VRS
®
. To disarm the VRS
®
during a VRS
®
trigger sequence:
➜
