7
© 1997 Directed Electronics, Inc.
Turn on the ignition. Push the Valet switch
within 15
seconds. The system should now disarm. If it does
not, you may have waited too long, so turn the igni-
tion off and on and try again.
Silent Mode
TM
To temporarily turn off the arm or disarm chirps, use Silent ModeTM. Simply
press Button II briefly before arming or disarming, and the confirmation
chirp(s) will be eliminated for that one operation only. If you want the arm/dis-
arm chirps turned off permanently, your dealer can do this for you.
NOTE: The Warn Away
®
response to lighter impacts is bypassed if the system is armed using Silent
Mode™. This ensures that no chirps will be emitted by the siren in an area you want chirp free.
The system is still fully able to trigger. Only the Warn Away
®
response is defeated.
Panic Mode
If you are threatened in or near your vehicle, you can attract
attention by triggering the system with your transmitter! Just
press Button I for 1.5 seconds, and you will enter
Panic Mode
.
The siren will sound and the parking lights will flash for 30 sec-
onds. To stop Panic Mode at any time, press Button I on the
transmitter again.
Valet
®
Mode
You can prevent your system from automatically arming and
triggering by using Valet® Mode. This is very useful when
washing the vehicle or having it serviced. In Valet® Mode, the
system will not arm, even with the transmitter, but all conve-
nience functions (door locks, trunk release, etc.) will work nor-
mally.
2
1
Summary of Contents for 550HF
Page 1: ...MODEL 550HF OWNER S GUIDE...
