29
© 2016 Directed. All rights reserved.
Configurations
29
3. Within
five
seconds
press
and release the Control Center button
on the Control Center once.
4. Within five seconds,
press
and
hold
the Control Center button.
The status LED will flash one time and the siren will chirp once to
confirm the system is ready for remote pairing.
5.
Release
the Control Center button and proceed below.
6.
Press
the
button on the remote control.
7. Wait several seconds for feedback as the remote generates a
security encryption and sends it to the Control Center. If Pairing
is successful the siren sounds and the remote emits several tones.
The screen displays if the Pairing is successful or has failed with
corresponding text. If pairing failed, repeat step 6.
8. Once the remote has been paired to the system, turn off the
Ignition, the siren sounds to confirm the exiting of pairing mode.
9. To exit Pairing Mode on the remote control press the
button
Pairing on the System will Exit if:
• The open door is closed.
• The ignition is turned off.
• There is no activity for 60 seconds.
• The Control Center button is pressed too many times.
Demo Mode
Demo Mode plays a pre-selected group of animations as a demon-
stration tool to show friends or family. Running Demo Mode shortens
the battery life over time if used excessively.
•
SINGLE SILENT
: The remote will display a selection of icons on
the status screen without beeps and tones then stop.
•
SINGLE SOUND
: The remote will display a selection of icons on
the status screen with beeps and tones then stop.
Summary of Contents for 5706V
Page 1: ...M O D E L 5706V O W N E R S G U I D E NO ONE DARES COME CLOSE...
Page 2: ......
Page 68: ......
