background image

17

© 2012 Directed. All rights reserved.

Warning! Safety First

Please read the safety warnings below before proceeding. Improper use of the 

product may be dangerous or illegal.

Installation

Due to the complexity of this system, installation of this product must only be performed 

by an authorized Directed dealer. If you have any questions, ask your retailer or contact 

Directed directly at 1-800-753-0600.

Remote Start Capable

When properly installed, this system can start the vehicle via a command signal from 

the remote control transmitter. Therefore, never operate the system in an enclosed area 

or partially enclosed area without ventilation (such as a garage). When parking in an 

enclosed or partially enclosed area or when having the vehicle serviced, the remote start 

system must be disabled using the installed menu wheel. It is the user’s sole responsibility 

to properly handle and keep out of reach from children all remote control transmitters 

to assure that the system does not unintentionally remote start the vehicle. THE USER 

MUST INSTALL A CARBON MONOXIDE DETECTOR IN OR ABOUT THE LIVING AREA 

ADJACENT TO THE VEHICLE. ALL DOORS LEADING FROM ADJACENT LIVING AREAS 

TO THE ENCLOSED OR PARTIALLY ENCLOSED VEHICLE STORAGE AREA MUST AT 

ALL TIMES REMAIN CLOSED. These precautions are the sole responsibility of the user.

Interference

All radio devices are subject to interference which could affect proper performance.

Upgrades

Any upgrades to this product must be performed by an authorized Directed dealer. Do 

not attempt to perform any unauthorized modifications to this product.

Water/Heat Resistance

This product is not designed to be water and/or heat-resistant. Please take care to keep 

this product dry and away from heat sources. Any damage from water or heat will void 

the warranty.

Summary of Contents for 9153VL




















Reviews: