SAFETY PRECAUTIONS
!!! This machine must be grounded!
Grounding provides a path of least resistance
for electrical current. To reduce the risk of
electrical shock should the machine
malfunction, the machine has a special
grounding plug. Don’t remove the ground pin
under any circumstances!
This machine is intended for commercial use.
It is constructed for use in an indoor
environment and is not intended for any other
use. Use only recommended accessories.
All operators shall read, understand and
exercise the following safety precautions:
1] Do not operate machine:
-
Unless trained and authorized.
-
Unless you have read and understand
operators manual.
-
In flammable or explosive areas.
-
With a damaged cord or plug.
-
If not in proper operating condition.
-
In outdoor areas.
-
In standing water
-
With the use of extension cords.
2] Before operating machine:
-
Make sure all safety devices are in
place and operate properly.
3] When using machine:
-
Do not run machine over cord.
-
Do not pull machine by cord or plug
-
Do not pull cord around sharp edges or
corners.
-
Do not unplug by pulling on the cord.
-
Do not stretch cord.
-
Do not handle plug with wet hands.
-
Keep cord away from heated surfaces.
-
Do not pick up burning or smoking
debris such as cigarettes, matches or
hot ashes.
-
Report machine damage of faulty
operation immediately.
4] Before leaving or servicing machine:
-
Turn off machine.
-
Unplug cord from outlet.
5] When servicing machine:
-
Unplug cord from outlet.
-
Use manufacturer supplied or approved
replacements parts.
