© 2013 Directed. All rights reserved.
2
5. Once the battery is inserted the system auto-
matically connects and confi rms the remote
control is paired with your system. If the
remote does not connect when the battery
is installed, remove the battery and press any
button on the remote a few times and then
repeat the pair process.
6. Once completed, click the “Finish” button.
The remote control is now ready for use.
Remote Control:
Arms the system in arm away status.
Disarms the system.
Arms the system in the arm stay status.
Arms the system in the arm custom status.
+
(SOS) – When these buttons are pressed
